IKEA KULINARISK 704.168.21 Bedienungsanleitung Seite 18

ENGLISH
Wire shelf:
Push the shelf between the guide bars of the
shelf support and make sure that the feet
point down.
Baking tray:
Push the baking tray between the guide bars
of the shelf support.
Wire shelf and baking tray together:
Push the baking tray between the guide bars
of the shelf support and the wire shelf on the
guide bars above.
Small indentation at the top
increase safety. The indentations
are also anti-tip devices. The high
rim around the shelf prevents
cookware from slipping of the
shelf.
Core temperature sensor
There are two temperatures to be set: the
oven temperature and the core temperature.
The core temperature sensor measures the
core temperature of the meat. When the
meat is at the set temperature, the oven
turns off.
Caution! Only use the core
temperature sensor supplied or
the correct replacement parts.
The core temperature sensor
must stay in the meat and in the
socket during the cooking.
1. Put the tip of the core temperature
sensor into the centre of the meat.
2. Put the plug of the core temperature
sensor into the socket at the front of the
oven.
3. Turn on the oven.
The display shows the core temperature
sensor symbol.
4. Press or in less than 5 seconds to set
the core temperature.
5. Set the heating function and, if
necessary, the oven temperature.
The oven calculates an approximate end
time. The end time is different for the
18