Service Data; Technical Data - IKEA SMAKSAK AA-2048877-5 Bedienungsanleitung

ENGLISH
Problem
There is no good cooking
performance using the func‐
tion: Direct Steam.
There is no good cooking
performance using the func‐
tion: Direct Steam.
The water in the cavity em‐
bossment does not boil.
The water comes out of the
cavity embossment.
The lamp is turned off.

Service data

If you cannot find a solution to the problem
yourself, contact an Authorised Service
Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Technical data

Technical data
Dimensions (internal)
Area of baking tray
Possible cause
You did not turn on the func‐
tion: Direct Steam.
You did not fill the cavity em‐
bossment with water.
The temperature is too low.
There is too much water in
the cavity embossment.
The Eco Fan Cooking function
is turned on.
We recommend that you write the data here:
Refer to "Activating the func‐
tion: Direct Steam".
Refer to "Activating the func‐
tion: Direct Steam".
Set the temperature at least
to 110 °C.
Deactivate the oven and
make sure that the appliance
is cold. Wipe the water with a
cloth or sponge. Add the cor‐
rect amount of water to the
cavity embossment. Refer to
the specific procedure.
Normal behaviour of the Eco
Fan Cooking function. Refer
to "Daily Use" chapter, Heat‐
ing Functions.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the oven cavity. Do not
remove the rating plate from the oven cavity.
.........................................
.........................................
.........................................
Width
Height
Depth
1438 cm²
25
Remedy
480 mm
361 mm
416 mm