Automatic Switch-Off; Cooling Fan; Safety Thermostat - IKEA KULINARISK 704.168.21 Bedienungsanleitung

ENGLISH
To turn off the function, press
shows a message. Press
to confirm.
When you turn off the oven, the
function also turns off.
Set + Go
The function lets you set a heating function
(or a programme) and use it later with one
press of any symbol.
1. Turn on the oven.
2. Set a heating function.
3. Press again and again until the
display shows: Duration.
4. Set the time.
5. Press again and again until the
display shows: Set + Go.
6. Press to confirm.
Press any symbol (except for
function: Set + Go. The set heating function
starts.
When the heating function ends, a signal
sounds.
• Function Lock is on when the
heating function works.
• The menu: Basic Settings lets
you turn the function: Set + Go
on and off.

Automatic Switch-Off

For safety reasons the oven turns off
automatically after some time, if a heating
function works and you do not change any
settings.
(°C)
30 - 115
. The display
again and then
) to start the
(h)
12.5
(°C)
120 - 195
200 - 230
The Automatic Switch-off does not work with
the functions: Light, Food Sensor, Duration,
End Time.
Brightness of the display
There are two modes of display brightness:
• Night brightness - when the oven is
turned off, the brightness of the display is
lower between 10 PM and 6 AM.
• Day brightness:
– when the oven is turned on.
– if you touch a symbol during the
night brightness (apart from ON /
OFF), the display goes back to the day
brightness mode for the next 10
seconds.

Cooling fan

When the oven operates, the cooling fan
turns on automatically to keep the surfaces
of the oven cool. If you turn off the oven, the
cooling fan can continue to operate until the
oven cools down.

Safety thermostat

Incorrect operation of the oven or defective
components can cause dangerous
overheating. To prevent this, the oven has a
safety thermostat which interrupts the
power supply. The oven turns on again
automatically when the temperature drops.
20
(h)
8.5
5.5