Routine Maintenance; Squeegee Blades: Replacing; Fuses: Replacing; Six Monthly Operations - Tennant T191 Bedienungsanleitung

Routine maintenance

its pin;

Squeegee blades: replacing

Turning or replacing the blades:
2);
replace the two blade retainers and the blades and screw up the knobs unscrewed previously.
replace the squeegee in its support following the instructions in the section "Mounting and adjusting the
squeegee".

Fuses: replacing

Fuses: replacing
Fuses must only be replaced by personnel trained and authorised by the manufacturer.
Routine maintenance
Daily operations
After each day's work, proceed as follows:
disconnect the machine from the power supply;
empty the dirty water tank and clean if necessary;
clean the squeegee blades and check for wear. If necessary, replace.
check that the suction hole in the squeegee is not blocked, if necessary remove encrusted dirt;
Battery powered versions: charge the batteries according to the procedure described.
Weekly operations
clean the suction hose;
clean the dirty water tank and detergent tank;
Battery powered versions: check the level of battery electrolyte and top up with distilled water if neces-
sary.

Six monthly operations

Have the machine checked by personnel trained and authorised by the manufacturer.
EN
-
29