Tennant T191 Bedienungsanleitung Seite 43

• To reduce the risk of the mains plug becoming disconnected from the ex-
tension during operation, fashion a safety knot as illustrated
secure the power cable to the retaining clip on the handle of the machine secure the power cable to the retaining clip on the handle of the machine
as illustrated as illustrated
• • Inspect Inspect the power cable and the extension periodically and if damaged, do
not on any account use the machine; contact a specialist technician ap-
proved by Tennant or take the machine to a Tennant service centre.
Maintenance
All maintenance operations must be performed in an adequately lit place and All maintenance operations must be performed in an adequately lit place and
only after disconnecting the machine from the power supply (in cable models, only after disconnecting the machine from the power supply (in cable models,
unplug the machine from the mains power socket, in battery models, remove unplug the machine from the mains power socket, in battery models, remove
the fuse from the battery bridge). In cable models, the operator must always be the fuse from the battery bridge). In cable models, the operator must always be
in a position to verify that the plug remains unplugged from the mains power in a position to verify that the plug remains unplugged from the mains power
socket throughout maintenance operations. socket throughout maintenance operations.
All work on the electrical system and all maintenance and repair opera-
tions (in particular, any operations other than those explicitly described in
this manual) must be entrusted to a skilled technician approved by Tennant,
or alternatively, the work must be carried out at a Tennant service centre.
If the power cable, plug or terminals require replacing, make sure the electrical
connections and cable grip are tightly fastened to guarantee the resistance of
the cable if pulled.
KEEP THESE INSTRUCTIONS SAFE.
. .
EN 11