Batteries: Installation And Connection; Batteries: Removal; Lifting And Transporting The Machine - Tennant T191 Bedienungsanleitung

Batteries: installation and connection

Make sure you connect the terminals marked with a "+" to the positive poles of the battery. Do not check
Meticulously follow the instructions given below as short circuiting the batteries could cause them to
Make sure the dirty water tank is empty and empty it if necessary (see relevant paragraph).
have previously removed the suction hose and dirty water tank drain hose from their housings.
When installing and connecting batteries, refer to the drawing on the detergent tank.
Mount the batteries on the machine using lifting means suitable for their weight.
Connect the battery wiring and bridge terminals to the battery poles.
Tighten the terminals on the poles and cover with Vaseline.
Put the dirty water tank back on the detergent tank.
When using the machine, follow the instructions below.

Batteries: removal

When removing the batteries, the skilled technician must be equipped with suitable personal protection
devices (gloves, goggles, overalls, safety shoes, etc) to reduce the risk of accidents. Make sure the
disconnect the battery wiring and bridge terminals from the battery poles.
Lift the batteries from the compartment using suitable lifting equipment.

Lifting and transporting the machine

All phases of lifting
environment with the adoption of the safety measures most appropriate to the situation.
The operator must always use personal protection devices.
To load the machine onto a means of transport, proceed as follows:
empty the dirty water and detergent tanks;
secure the machine to the pallet;
lift the pallet (with the machine) using a fork lift truck and load it onto the means of transport;
anchor the machine to the means of transport with cables connected to the pallet and machine itself.
DANGER
the battery charge by sparking.
explode.
WARNING
DANGER
follows:
WARNING
and moving must
EN
be performed in an adequately illuminated
23