Using The Buckle - Kinderkraft COMFORT UP Bedienungsanleitung

• A loose harness can be dangerous. Check the harness adjustment and tighten each time the
child is placed in the seat.
Ensure that any lap strap is worn low down, so that the pelvis is firmly engaged, the belt is not
twi ste d.

4.4.1 Using the buckle

• Put the two metal sections of the buckle connectors together (Fig. 4.4.1-1).
• Slot the two buckle connectors into the slot in the top of the buckle until they "click" into
place (Fig. 4.4.1-2).
• Check the harness is correctly locked by pulling the shoulder straps Upwards (Fig. 4.4.1-3).
• To release the harness, press the red button on the buckle downward
5. Usage for age (group 11111)
The harness system must be removed from the seat (see point 5.1) when used for these age
groups 15 kg - 36 kg
car seat.
5.1 Removal of the harness
• Loosening the harness (see point 4.3), Turn the seat to the back
• Slide both of the harness straps off the harness connector
• Slide the belt of the chest pads off the Chest pad connector (Fig. 5.1-2).
• Pull the
strap till the steel pole gets out of the soft (Fig. 5.1-3, Fig. 5.1-4).
• Now you can remove the belts as well as the tongue in an upwards direction
• Installation of the harness Is carried out In reverse order to removal.
Keep harness with all parts in a safe place, to use in the future
5.2 Height adjustment of headrest
Regularly check whether the head rest is optimally to your child. The height of the head rest is
set optimally to the size of your child, when their headrest comfortably in the middle of the
headrest.
• To raise or lower the head rest: pull the head rest adjustment handle
adjust the head rest by turning the handle (Illus.
• Make sure to lock the handle after adjusting the head rest.
.Only the 3-point vehicle belt system can be used to buckle up the child
EN
(Fig.
.
5.2).
25
s.
.
5.1-1).
(Fig. 5.1-5).
(K). You may now