Driving In Nails - Prebena 3X-CNW50 Originalbetriebsanleitung

Driving in nails


Wear safety goggles and suitable protective clothing
during operation.

Comply with applicable industrial safety regulations.

Wear suitable hearing protection.

Comply with applicable noise protection regulations.

Choose the lowest possible operating pressure.

Use the fastener driving tool for wooden objects only.

Make certain the insertion depth is not greater than
the thickness of the piece of wood.

Press the fastener driving tool firmly on the wood while triggering.
If nails are driven into pieces of wood that are too hard or into other nails,
there is a powerful recoil. This can cause the fastener driving tool to slip.
The insertion depth of the nails depends on the hardness and thickness
of the piece of wood and on the set operating pressure.

Make certain there is no one behind the piece of wood.

Check the function of the fastener driving tool at a low operating
pressure with single triggering.
WARNING
Danger of injury from electrical shock.

Make certain before triggering that
no power line will be struck.
WARNING
Eye injuries and other injuries are possible
during operated due to flying splinters.
WARNING
Hearing damage is possible due to
loud operating noise.
WARNING
Danger of injury due to sliding nails or nails
driven in too deep or due to recoil.
Operating the fastener driving tool
31