Operating The Fastener Driving Tool; Selecting The Triggering Setting - Prebena 3X-CNW50 Originalbetriebsanleitung

Operating the fastener driving tool

Selecting the triggering setting

Types 3X-CNW50, 4X-CNZ45, 5F-CNW65, 7F-CNW90 and 8XR-
CNW90
You can set fastener driving tools 3X-CNW50, 4X-CNZ45, 5F-CNW65,
7F-CNW90 and 8XR-CNW90 for single triggering or repeated triggering.
With repeated triggering you do not have to press the trigger every time.
Each triggering drives one nail into the material.

Do not point the fastener driving tool at yourself, other people
or animals.
Especially for the following types of use, do not use the triggering setting
in repeated driving:

For types of use that require moving with the fastener driving tool
over scaffolding, stairs, ladders or structures similar to ladders,

for closing boxes or crates and

for mounting transport safety devices.

In these cases position the selector switch to trigger one time.
WARNING
Accidental triggering while changing the triggering
setting may result in severe or fatal injuries.
Operating the fastener driving tool
27