Preparation Of The Fastener Driving Tool; Unpacking The Fastener Driving Tool - Prebena 3X-CNW50 Originalbetriebsanleitung

Information on the rating plate
The rating plate is pasted onto the magazine or the housing.
It contains the following information:

The name of the company and country of origin,

The type designation of the fastener driving tool,

The type designation of the fastening element that can be used,

The CE mark (the product meets the requirements of the standards
listed in the Declaration of Conformity),

The triangle standing on its peak (this triangle indicates that this
device may only be used if the triggering safety device is functioning).

Preparation of the fastener driving tool

Unpacking the fastener driving tool


Take the fastener driving tool out of the packaging.

Remove all packaging materials such as films,
filling material and the packaging carton.

Do not allow children to play with the packaging film.

Keep the packaging material where it is inaccessible for children.

Keep the packaging material for later use.

Keep the packaging material for transporting the fastener driving tool.

The fastener driving tool must only be transported in the transport
case.
Preparation of the fastener driving tool
WARNING
Danger of asphyxiation for children playing
packaging films.
15