VANTRUE X3 Bedienungsanleitung Seite 8

3.2 Installing memory card (Recommend Samsung Pro
Endurance Card or Samsung Evo Card)
NOTE: To insert the card, power off the camera first, then push the card
into the slot until it clicks agin, otherwise the dash cam will say goodbye
and shut off. To remove the card, power off the camera first too. Please
use a genuine microSD memory card of from 8GB to 256GB with a speed
rating of class 10 or higher. We recommend Samsung Pro Endurance cards
or Samsung Evo cards. Samsung Micro SD cards would only be made in
either Korea or the Philippians. Please be sure to buy a genuine Samsung
card.
NOTE: When using a 64GB, 128GB or 256GB MicroSD card, please
format it to FAT32 on the camera first.
Please insert the card into the camera. If it says 'please insert TF
card' or 'error card please format' here, please press the recording
button(OK button) and thenpress the power button to access into
the menu, go 'system setup' and choose 'Format SD Card'. Then select
the " OK " and wait for 10 seconds. Then the card will be formatted
successfully.
(If you format it on computer, please search online on "How to
formata 64GB microSD card to FAT32".）
NOTE:
1. The MicroSD card should be formatted every 2 weeks to maximize
the lifetime of the memory card.
2. Please do not take the card out when the camera is recording in
case that the important video files missing.
3.3 Installing the camera onto your windshield
1. Connect the suction mount to the camera's mounting socket, push
it in till it clicks.
- 7 -