Safety Instructions; Symbols Used To Mark Instructions; Instructions For Use; Purpose And Intended Use - Makita VC4210M Originalbetriebsanleitung

1

Safety instructions

This document contains the safety information re-
levant for the appliance along with a quick reference
guide. Before starting up your machine for the first
time, this instruction manual must be read through
carefully. Save the instructions for later use.
Further support
Further information on the appliance can be found
on our web site at www.makita.com.
For further queries, please contact the Makita ser-
vice representative responsible for your country.
See reverse of this document.
1.1

Symbols used to mark instructions

DANGER
Danger that leads directly to serious or irre-
versible injuries, or even death.
WARNING
Danger that can lead to serious injuries or
even death.
CAUTION
Danger that can lead to minor injuries and
damage.
1.2

Instructions for use

The appliance must:
• only be used by persons, who have been in-
structed in its correct usage and explicitly com-
missioned with the task of operating it
• only be operated under supervision
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge.
Children shall be supervised to make sure that they
do not play with the appliance.
Do not use any unsafe work techniques.
Never use the appliance without a filter.
Switch off the appliance and disconnect the mains
plug in the following situations:
• Prior to cleaning and servicing
• Prior to replacing components
• Prior to changing over the appliance
• If foam develops or liquid emerges
Besides the operating instructions and the binding
accident prevention regulations valid in the country
*) Optional accessories / Option depending on model
Original instruction
of use, observe recognised regulations for safety
and proper use.
Before starting work, the operating staff must be
informed on and trained within:
• use of the machine
• risks associated with the material to be picked
up
• safe disposal of the picked up material
1.3

Purpose and intended use

This mobile dust extractor is designed, developed
and rigorously tested to function efficiently and
safely when properly maintained and used in ac-
cordance with the following instructions.
This machine is suitable for industrial use, such as
e.g. plants, construction sites and workshops.
This machine is also intended for commercial use,
for example in hotels, schools, hospitals, factories,
shops, offices and rental businesses.
Accidents due to misuse can only be prevented by
those using the machine.
READ AND FOLLOW ALL SAFETY
INSTRUCTIONS.
The appliance is suitable for picking up dry, non-
flammable dust and liquids.
Any other use is considered as improper use. The
manufacturer accepts no liability for any damage re-
sulting from such use. The risk for such use is borne
solely by the user. Proper use also includes proper
operation, servicing and repairs as specified by the
manufacturer.
The air flow in Safety Vacuum systems has to be
strictly controlled to achieve a minimum flow rate of
V = 20 m/s in the suction hose.
min
The appliance is suitable for picking up dry, non-
flammable dust, non flammable liquids, sawdust and
hazadous dusts with OEL values (Occupational Ex-
posure Limit) > 0.1 mg/m³.
Dust Class M (IEC 60335-2-69). The dusts which
belong to this class are: dusts with OEL values
> 0.1 mg/m³ as well as saw dust. The machine is
tested in its entirety by vacuums for this dust class.
The maximum degree of permeability is 0.1 % and
the disposal must be low dust.
For dust extractors, ensure adquate air change rate,
when the exhaust air is returned to the room. Ob-
serve national regulations before use.
1.4

Electrical connection

It is recommended that the machine should be con-
nected via a residual current circuit breaker.
D
Makita VC4210M
GB
F
NL
I
N
S
DK
SF
E
P
GR
TR
SLO
HR
SK
CZ
PL
H
RO
BG
RUS
EST
LV
LT
AL
MK
SR
UK
13