Additional Safety Rules; Important Safety Instructions; For Built-In Battery - Makita CL111D Betriebsanleitung

7. Keep hair, loose clothing, fingers, and all parts
of body away from openings and moving parts.
Turn off all controls before removing the
8.
battery.
9. Use extra care when cleaning on stairs.
10. Do not use to pick up flammable or combusti-
ble liquids, such as gasoline, or use in areas
where they may be present.
11. Use only the charger supplied by the manufac-
turer to recharge.
12. Do not pick up anything that is burning or
smoking, such as cigarettes, matches, or hot
ashes.
13. Do not use without dust bag and/or filters in
place.
14. Do not charge the battery outdoors.
15. Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
16. Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
17. When (the) battery pack is not in use, keep
it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small
metal objects, that can make a connection
from one terminal to another.
18. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water.
SAVE THESE INSTRUCTIONS.

ADDITIONAL SAFETY RULES

This appliance is intended for household use.
1. Read this instruction manual and the charger
instruction manual carefully before use.
2. Do not pick up the following materials:
— Hot materials such as lit cigarettes or
spark/metal dust generated by grinding/
cutting metal
— Flammable materials such as gasoline,
thinner, benzine, kerosene or paint
— Explosive materials like nitroglycerin
— Ignitable materials such as Aluminum,
zinc, magnesium, titanium, phosphorus
or celluloid
— Wet dirt, water, oil or the like
— Hard pieces with sharp edges, such as
wood chips, metals, stones, glasses,
nails, pins or razors
— Powder to clot such as cement or toner
— Conductive dust such as metal or carbon
Fine particle like concrete dust
—
Such action may cause fire, injury and/or prop-
erty damage.
Stop operation immediately if you notice any-
3.
thing abnormal.
4. If you drop or strike the cleaner, check it care-
fully for cracks or damage before operation.
5. Do not bring close to stoves or other heat
sources.
Do not block the intake hole or vent holes.
6.
SAVE THESE INSTRUCTIONS.
IMPORTANT SAFETY
INSTRUCTIONS

FOR BUILT-IN BATTERY

1. Before using built-in battery, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using
battery.
2. Do not disassemble built-in battery.
If operating time has become excessively
3.
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5. Do not short the built-in battery:
Do not touch the terminals with any con-
1.
ductive material.
2. Avoid storing built-in battery in a con-
tainer with other metal objects such as
nails, coins, etc.
3. Do not expose built-in battery to water or
rain.
A battery short can cause a large current
flow, overheating, possible burns and
even a breakdown.
Do not store the tool and built-in battery in
6.
locations where the temperature may reach or
exceed 50°C (122°F).
Do not incinerate the built-in battery even if
7.
it is severely damaged or is completely worn
out. The built-in battery can explode in a fire.
8. Be careful not to drop or strike battery.
SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum
battery life
1. Charge the built-in battery before completely
discharged.
Always stop tool operation and charge the
built-in battery when you notice less tool
power.
2. Never recharge a fully charged built-in battery.
Overcharging shortens the battery service life.
3. Charge the built-in battery with room tempera-
ture at 10°C - 40°C (50°F - 104°F). Let a hot
built-in battery cool down before charging it.
4. Charge the battery cartridge once in every six
months if you do not use it for a long period of
time.
9 ENGLISH