Herunterladen Inhalt Inhalt Diese Seite drucken

Product Description - MNC OBD2 - 12V Bedienungsanleitung

Autodiagnosetool
Inhaltsverzeichnis

Werbung

4.5 ACTIVAREA STĂRII I/M READINESS
În acest mod, sistemul verifică sistemul de control al compoziției
gazelor de eșapament și funcționarea corectă a acestuia. Compoziția
gazelor de eșapament emise nu trebuie să depășească limitele legale.
Acest test poate fi utilizat, de exemplu, pentru a verifica funcționare
corectă a catalizatorilor, după repararea sau înlocuirea acestora.
4.6 INFORMAŢII DESPRE VEHICUL
Poate fi utilizat pentru a citi datele vehiculului introduse în computerul
de bord al vehiculului, cum ar fi numărul șasiului vehiculului, codul
de calibrare, numărul de verificare a calibrării. Aceste date sunt ușor
comparabile cu numerele reale ştanţate pe şasiu. (este obligatorie
concordanţa între numere)
4.7 TEST COMPONENT
Această funcţie permite efectuarea unui test de etanşeitate pe
vehicule echipate cu sistemul EVAP. Acest aparat de diagnosticare
poate comanda sistemul de bord al vehiculului să efectueze sau să
oprească testul. Înainte de a utiliza această funcție, verificați manualul
de reparații al vehiculului pentru a determina procedurile necesare!
Dacă sistemul nu acceptă efectuarea unui test de etanşeitate EVAP,
este afișat un mesaj de avertizare.
5. ANEXĂ
Vezi pagina 23.
USER MANUAL
SUPPORTED VEHICLES:
All vehicles equipped with OBD2, EOBD and JOBD systems and 16
pin interfaces (passenger cars, vans, SUVs, vans sold in the US, Japan
and Asia after 1996 for European cars: for petrol engine from 2001,
for diesel engine from 2004, with CAN, VPW, PWM, ISO9141, KW2000
protocol(including car generations with CAN protocol).
FEATURES AND BENEFITS:
1. Real-time data transmission
2. Displays the status of the sensors
3. Possibility to save data
4. Display error code history
5. Reads manufacturer-generated (P0, P2, P3, U0) and specific
(P1, P3, and U1) codes
6. Clear the error codes and turn off the "check engine" indicator
20
CAR DIAGNOSTIC TOOL - error code reader 55679
EN
7. Displays I / M Readiness data
8. Detect the Freeze Frame data types of the OBD2 system
9. Turn off the (MIL) trouble display on the dashboard
10. Identifies and displays pending codes
11. Reads the vehicle chassis number
12. Shows the error codes of already read errors for future use
13. Simple, user-friendly operation
14. LCD display with backlight and adjustable contrast
15. Multilingual device (Hungarian, English, German, Romanian,
Slovak, Czech)
SAFETY WARNINGS:
1. Before using the appliance, make sure you understand the
operation of the appliance in all details!
2. Do not connect the device to the OBD socket of the vehicle
unless you have verified that it is compatible with it! Use this
manual and the vehicle operating manual for guidance.
3. Do not connect the device to a vehicle with the ignition on or
while the engine is running! Make sure the vehicle engine is off
before connecting.
4. Do not perform any operation that you do not know with
certainty about its operation and consequences.
5. The manufacturer and the distributor shall not be liable for any
damage to the vehicle!
6. Error messages detected and deleted by the device do not mean
that the problem has been corrected in the vehicle!
7. Keep the appliance out of the reach of children.
8. If you are not using the device, put it back in its box with the
instruction manual. Store the device in a place free of humidity
and dust.
9. Do not use this device under the influence of medications,
alcohol, or other mind-altering appliance.
10. Keep the device clean and use a slightly damp, chemical-free
cloth to clean it if necessary.
11. Take care of the appliance's integrity, treat the appliance as a
fine instrument, avoid falling, and the enclosure is not impact
resistant!
12. Inspect the car only in a safe place! Make sure that the exhaust
gases are properly vented and that the room is ventilated!
13. Do not leave the vehicle unattended during the test with the
ODB connected!
14. Make sure you have the right test environment: The vehicle's
handbrake must be engaged with the transmission in „P" or
„Neutral" positionHave a fire extinguisher nearby to prevent
possible fires.

1. PRODUCT DESCRIPTION:

Extremely useful, highly compatible Hungarian language auto

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis