IKEA KULINARISK Handbuch Seite 18

ENGLISH
Removing the oven door and the glass
panels
1
Open the door fully.
3
Close the oven door
to the first opening
position (halfway).
Then pull forward
and remove the
door from its seat.
5
Release the locking
system to remove
the glass panels.
2
Lift and turn the lev-
ers on the two hing-
es.
4
Put the door on a
soft cloth on a sta-
ble surface.
6
90°
Turn the two fasten-
ers by 90° and re-
move them from
their seats.
7
2
1
Carefully lift (step 1)
and remove (step 2)
the glass panels
one by one. Start
from the top panel.
Clean the glass panels with water and
soap. Dry the glass panels carefully.
Installing the door and the glass panels
When the cleaning is completed, install the
glass panels and the oven door. Do the
above steps in the opposite sequence.
Make sure that you put the glass panels (1,
2 and 3) back in the correct sequence. The
middle panel (2) has a decorative frame.
The screen-printing zone must face the in-
ner side of the door. Make sure that after
the installation the surface of the glass pan-
el frame (2) on the screen-printing zones is
not rough when you touch it.
2 3
1
Make sure that you install the top panel in
the seats correctly.
18