IKEA KULINARISK Handbuch Seite 10

ENGLISH
Display
1
Button
/
Setting an oven function
1
1. Activate the appliance.
2. Press
again and again until the sym-
bol for the necessary oven function
flashes.
The display shows the default tempera-
ture. If you do not change the tempera-
ture in approximately five seconds, the
appliance starts to operate.
Oven functions
Oven Function
Forced Air Cooking
Conventional (Top
and Bottom Heat)
2 3
Function
On / off
Selection
Fast Heat Up
Pyrolysis
Clock
Minus, plus
Light To activate the oven lamp without a cooking function.
To bake on more than one shelf positions at the same
time. To dry food. Set the temperature 20 - 40 °C
lower than for Conventional Cooking.
To bake and roast food on one shelf position.
Cooking function
1
Temperature
2
Time
3
Description
To activate or deactivate the appliance.
To set an oven function.
To activate the Fast Heat Up function.
To start the pyrolytic cleaning.
To set a clock function.
To set the time and temperature.
3. To change the temperature, press + or
-.
Changing the temperature
To change the temperature when the appli-
ance operates:
1. Press the button
es.
2
2. Press the button + or - to change the
temperature.
When you set an oven function, the
temperature symbol flashes. The sym-
bol shows that the temperature in the appli-
ance increases.
When the appliance is at the set tempera-
ture, an acoustic signal sounds and the tem-
perature symbol stops flashing.
Application
10
. The symbol ° flash-