IKEA KULINARISK Handbuch Seite 17

ENGLISH
1. Remove the removable shelf supports
and accessories from the appliance.
Refer to "Removing the shelf supports".
Caution! Do not let the removable
shelf supports stay in the appliance
during the Pyrolysis. There is a risk of
damage.
2. Remove the worst dirt manually.
3. Fully close the oven door.
The cleaning procedure cannot start if
you do not close the oven door and if
you do not remove the core temperature
sensor from the socket.
4. Press
again and again until the dis-
play shows
– The display shows P1 and
after the other.
– An acoustic signal sounds as a re-
minder to remove all accessories
from the oven.
– The clock display shows 1:30.
– Duration
5. When
flashes, press + or - to set the
necessary procedure:
• P1 - if the oven is not very dirty. The
procedure is 1 h 30 min long.
• P2 - if the oven is more dirty. The
procedure is 2 h 30 min long.
6. Press
to start the procedure.
The bars on the symbol come on one
by one to show that the temperature in
the appliance increases. The symbol
flashes.
After some minutes the door locks. The
display shows the symbol
When the Pyrolysis is completed, the dis-
play shows the time of day. The oven door
stays locked. When the appliance is cool
again, an acoustic signal sounds and the
door unlocks.
To stop the Pyrolysis before it is com-
pleted, press
Setting the end time for the Pyrolysis
You can use the End
lay the start of the procedure.
.
one
flashes.
.
.
function to de-
1. Start the Pyrolysis procedure.
2. Press
again and again until the sym-
bol flashes. The display shows the
time for the end of the Pyrolysis.
3. Press + or - to adjust the time for the
end of the Pyrolysis.
Oven lamp
Warning! Be careful when you change
the oven lamp. There is a risk of
electrical shock.
Before you change the oven lamp:
• Deactivate the oven.
• Remove the fuses in the fuse box or deac-
tivate the circuit breaker.
Put a cloth on the bottom of the oven
to prevent damage to the oven light
and glass cover.
Always hold the halogen lamp with a cloth
to prevent grease residue from burning on
the lamp.
1. Turn the glass cover counterclockwise to
remove it.
2. Clean the glass cover.
3. Replace the oven light bulb with a 40
watt, 230V (50Hz), 350 °C heat resist-
ant oven light bulb (Connection type:
G9).
4. Install the glass cover.
Cleaning the oven door
The oven door has four glass panels. You
can remove the oven door and the internal
glass panels to clean them.
The oven door can close if you try to
remove the glass panels before you re-
move the oven door.
17