Tuning Into Stations Manually; Selecting Stored Stations; Storing Stations; Storing Stations Manually - Blaupunkt new jersey mp68 Bedienungs- Und Einbauanleitung

Tuning into stations manually

Notes:
•
Tuning into stations manually is possible
only if the RDS functions and PTY are
deactivated.
•
If the RDS function is activated, you can
scroll in the broadcasting networks in
whose reception area you are located.
u Press the rocker switch or @ to change
the frequency quickly (press and hold) or in
100-kHz increments (press short).

Selecting stored stations

u
Select the desired waveband or memory
bank.
u Press one of the station buttons 0 - 9 A.
Or in the List menu:
u
To change to the menu mode, press the
DIS•ESC button ;.
u
Press the rocker switch
a frequency or station from the list.
Press the OK button :.
u
The stored station is called up, provided that it
can be received at the current vehicle position.
The frequency of the station or the station name
appears on the display.

Storing stations

There are 2 ways of storing a station:
•
•

Storing stations manually

After tuning into a station, it can be stored as
follows:
u
Or in the List menu:
u
u
u
@ to select
or
The list displays the frequency or the name of the
station at the selected memory location. The sta-
tion was stored.
Searching and storing stations automatically
(FM only: TRAVEL STORE )
You can automatically search for and store the
ten FM stations offering the strongest reception
in the region in the FMT memory bank, Stations
that were previously stored in the FMT memory
bank are automatically deleted.
u
u
u
"TRAVEL STORE" appears on the display.
u
The tuner starts with the automatic seek tuning.
After the storing is completed, the radio plays the
station at memory location 1 of the FMT level.
Storing stations manually
Searching and storing stations automatically
(Travelstore)
Press one of the station buttons 0 - 9 A for
approx. 2 seconds to which you want to
assign the station.
To change to the menu mode, press the
DIS•ESC button ;.
Press the rocker switch
a memory location in the list.
Press and hold the OK button : for approx.
2 seconds.
To change to the menu mode, press the
DIS•ESC button ;.
Press the rocker switch @ to open the
"Tune" (adjusting stations) menu.
Press the rocker switch
the "T-STORE" function.
Press the OK button :.
Tuner mode
@ to select
or
@ to select
or
83