Device Card; Startup; Switching The Device On/Off; Adjusting The Volume - Blaupunkt new jersey mp68 Bedienungs- Und Einbauanleitung

Theft protection | Startup
Note:
Your individual code number is not reset
when restoring the factory settings, but
retained.
u Press the MENU button 9.
u Press the rocker switch @ to open the
"Syst" system menu.
The "CODE" menu item is selected.
u
Press the OK button to call up the menu
item.
u
If the code query is activated, enter the
current code number by pressing the
corresponding buttons of the A keys.
u Press the OK button : to confi rm the
current code number.
u
Enter the new code number by pressing the
corresponding buttons of the A keys.
u Press the OK button : to save the new
code number.
You are returned to the system menu.

Device card

In case of a theft, the device card on the back of
these instructions together with the purchase re-
ceipt is your proof of ownership. Enter the serial
number and the code number of the device. The
serial number is located on the side of the device
and poss. also on the original box.
76

Startup

This chapter contains information about switch-
ing the device on and off, adjusting the volume,
performing menu settings, and resetting the de-
vice to the factory settings. It also provides infor-
mation about connecting a USB medium and cor-
rectly inserting a CD in the device.

Switching the device on/off

The device is switched on or off with the igni-
tion. The introductory animation starts and can
be cancelled with the OK button :. The device
plays the audio source you previously listened
to.
To manually switch on the device,
press the On/Off button ?.
u
To switch off the device,
u press and hold the On/Off button ? for
approx. 2 seconds.
Note:
To protect the vehicle battery if the ignition
is switched off, the device automatically
switches off after one hour.

Adjusting the volume

DANGER!
High volume
Excessive volume can damage your hearing and
you may fail to hear acoustic warning signals!
ü
The devices mutes itself while it changes the
CD in the CD changer or the audio source.
During this mute phase, the volume may be
changed, but it is not audible. Do not
increase the volume during a mute phase.
ü
Always set the device to a moderate volume.
Turn the volume control >.
u
The current volume is shown on the display and
used for all audio sources.