Blaupunkt new jersey mp68 Bedienungs- Und Einbauanleitung Seite 115

Tip:
Insert a CD which you know very well if you
want to adjust the equalizer. First, set the
bass, treble, balance, and fader to zero. For
equalizer settings, fi rst change the settings
of the mid-frequencies, followed by those
for treble and fi nally bass.
The table shows the expanded setting options
for bass (EBASS), treble (ETREBLE), middle
(EMIDDLE) and X-Bass (EXBASS) that can be
performed in the Enhanced menu.
Note:
The table does not contain all the settings
that are possible in the Enhanced menu.
Changing equalizer settings (EBASS,
ETREBLE, EMIDDLE, EXBASS)
In the Enhanced menu, you can change these
settings :
•
"GAIN " (level )
•
"FREQ " (frequency)
•
"QUAL " (quality factor )
To adjust the equalizer,
u
In the Audio menu, press the rocker switch
@ repeatedly until the "EN AUDIO"
or
(Enhanced menu) menu item is selected.
Level (GAIN) –
Frequency 60 Hz, 80 Hz,
(FREQ) 100 Hz, 200 Hz
Quality fac- 1.0, 1.25, 1.5, 2.0
tor (QUAL)
EN AUDIO (Enhanced menu)
EBASS ETREBLE
–
10 kHz, 12.5 kHz,
15 kHz, 17.5 kHz
–
u Press the OK button : to call up the menu
item.
The Enhanced menu appears.
u
in the Enhanced menu, press the rocker
switch or
menu items:
•
"EBASS ": Bass
•
"ETREBLE": Treble
•
"EMIDDLE": Middle
•
"EXBASS ": Increasing bass at low volume
u Press the OK button : to call up the menu
item.
u
Press the rocker switch
switch between the available menu items
(see the table):
•
"GAIN"
•
"FREQ"
•
"QUAL"
u Press the rocker switch or @ to change
the setting.
After you performed the settings for all menu
items,
u Press the OK button : to select a different
function, or press the DIS•ESC button ; to
exit the menu.
AUDIO (Audio menu)
EMIDDLE
-7 to +7
500 Hz, 1,000 Hz,
1,500 Hz,
2,500 Hz
0.5, 0.75, 1.0,
1.25
Sound settings
@ to select one of these
@ to
or
EXBASS
0 to 3
30 Hz, 60 Hz
100 Hz
–
115