User Settings; Opening The System Menu; Changing The Welcome Text (On Msg); Changing Time Settings - Blaupunkt new jersey mp68 Bedienungs- Und Einbauanleitung

User settings

User settings
In the System menu, you can adjust these preset-
tings to your preferences:
•
Welcome text
•
Clock settings
•
Volume settings
•
Display settings
•
Scan time

Opening the System menu

u Press the MENU button 9.
Press the rocker switch @ to open the
u
"Syst" System menu.
Changing the welcome text
(ON MSG )
When you switch on the device, an animation ap-
pears. It contains the factory set welcome text
"THE ADVANTAGE IN YOUR CAR". To change this
text,
u
in the System menu, press the rocker switch
@ until the "ON MSG" menu item is
or
selected.
Press the OK button : to call up the menu
u
item.
The current welcome text is displayed. The posi-
tion digit fl ashes and can be changed. You can
now enter your own welcome text with up to
35 characters:
u
Enter the text by pressing the corresponding
buttons of the A keys. Select the desired
letter, if necessary by pressing a button
several times.
After entering one letter, the device automatical-
ly switches to the next one. To correct any entry
errors, select the corresponding digit by press-
ing the rocker switch or @ again.
After entering the complete welcome text,
u press the OK button : to store the
welcome text entered.
116
Notes:
•
To quit the text input without changing
the welcome text, press the DIS•ESC
button ;.
•
If the text entry is interrupted, e.g. by a
traffi c announcement, the previous
changes are not stored.

Changing time settings

The following settings can be changed in the
System menu:
•

Switching time display on/off (OFF CLK)

•
Selecting 12h/24h time display
(CLK MODE)
•
Setting the time (CLK SET)
Switching time display on/off (OFF CLK)
The time can be displayed while the device is
switched off, if the vehicle ignition is switched
on. To switch this time display on/off,
u
in the System menu, press the rocker switch
@ repeatedly until the "OFF CLK"
or
menu item is selected.
u Press the OK button : to call up the menu
item.
u
Switch between the settings with the rocker
switch or @.
•
"OFF CLK"
•
"OFF CLK"
u Press the OK button : to select a different
function, or press the DIS•ESC button ; to
exit the menu.
Selecting 12h/24h time display (CLK MODE )
The time can be displayed using the 12-hour or
24-hour format.
u
In the System menu, press the rocker switch
@ repeatedly until the "CLK MODE"
or
menu item is selected.
u Press the OK button : to call up the menu
item.
: Time display is on.
: Time display is off.