Aux Mode; Front-Aux-In Socket And Rear Aux Input; Front Aux-In Socket; Rear Aux Input - Blaupunkt new jersey mp68 Bedienungs- Und Einbauanleitung

AUX mode

FRONT-AUX-IN socket and rear AUX
input

Front AUX-IN socket

DANGER!
Increased risk of injury from
connector.
In case of an accident, the protruding connector
in the front AUX-IN socket may cause injuries.
The use of straight plugs or adapters leads to an
increased risk of injury.
For this reason, we recommend using angled
jack plugs, e.g. the Blaupunkt accessories cable
(7 607 001 535).
As soon as an external audio source, such as a
portable CD/MiniDisc or MP3 player is connect-
ed to the FRONT-AUX-IN socket, it can be select-
ed with the SOURCE button 8. "FRONT AUX"
then appears on the display.
Note:
You can individually name the audio source
connected via the FRONT-AUX-IN socket
and mix it with another audio source. For
further details, please read the sections
"Naming external audio sources (AUX EDIT)"
and "Mixing an external audio source with
another audio source (MIX AUX)" in this
chapter.

Rear AUX input

You can connect different external audio sources
to the device via the rear AUX input:
•
C'n'C-ready devices from the Blaupunkt
accessories programme (e.g. an iPod®/USB
interface).
•
CD changer
•
Other external audio sources, such as
portable CD players, MiniDisc players, MP3
players or a non-C'n'C-ready Blaupunkt
interface.
The C'n'C interface from Blaupunkt (C'n'C =
Command and Control) allows an even more
convenient control of devices and data carriers
that are connected to the car sound system via a
C'n'C-ready Blaupunkt interface.
This device is factory set for the connection of
C'n'C-ready Blaupunkt accessory devices. If
you want to connect a non-C'n'C-ready device,
such as a CD changer or another external audio
source, please perform the settings described in
the following sections.

Adjusting the rear AUX input mode

You can select between these modes for the rear
AUX input:
•
C'n'C mode for C'n'C-ready Blaupunkt
interfaces.
•
Non-C'n'C mode for non-C'n'C-ready
Blaupunkt interfaces, CD changers and
other external audio sources.
The C'n'C mode is activated by default.
To switch between C'n'C mode and non-C'n'C
mode,
u press the MENU button 9.
u Press the rocker switch @ to open the
"Syst" system menu.
u
Press the rocker switch
"CDC" menu item is selected.
Press the OK button : to call up the menu
u
item.
u
Switch between the settings with the rocker
switch or @.
•
"CDC ON"
•
"CDC ON"
As soon as you change the setting, the device
briefl y switches off and back on again with the
selected setting (Reset).
AUX mode
@ until the
or
: Non-C'n'C mode.
: C'n'C mode.
101