Tuning Into A Station; Storing Stations - Blaupunkt Calais MP48 Bedienungs- Und Einbauanleitung

Radio mode

Tuning into a station

There are various ways of tuning into a sta-
tion.
Automatic station seek tuning
u
Press the or
The radio tunes into the next receivable
station.
Notes:
• If the priority for traffi c information is
activated, the next traffi c information
station is selected.
• If PTY is activated, the next station
of the selected programme type is
selected.
Setting the sensitivity of station seek
tuning
You can select whether only strong stations
should be tuned into with low sensitivity or
also weak stations with high sensitivity:
Press the MENU button 7.
u
u
Press the or
ly until "SENS" and the current setting
"LO" (low sensitivity) or "DX" (high sen-
sitivity) appear on the display 6.
u
Press the or
between the settings "LO" and "DX".
To exit the menu,
u press the MENU button 7.
Tuning into stations manually
To change the set frequency in small incre-
ments,
u
press the or
To change the set frequency quickly,
46
button 8.
button 8 repeated-
button 8 to change
button 8.
u
press and hold down the
ton 8.
Note:
You can only tune into stations manu-
ally if the RDS function and PTY are
switched off.
Browsing through broadcasting
networks (FM only)
If a radio station provides several pro-
grammes, you have the option of browsing
through its so-called "broadcasting net-
work".
u
Press the or
to the next station on the broadcasting
network.
Note:
Scrolling through broadcasting net-
works is possible only if the RDS func-
tion is switched on and PTY is switched
off. When using this feature, you will
only be able to switch to stations that
you have received once before already.
You can use the Travelstore function (T-
STORE) for this purpose.

Storing stations

Storing stations manually
u
Select the desired memory bank or
waveband.
u
Tune into the station.
u
Press and hold the station button 1 - 6
< for longer than 2 seconds to assign
the station to that button.
The confi rmation beep sounds. The station
is stored on the selected station button.
or but-
button 8 to switch