Scope Of Delivery; Placing The Device In Operation; Switching On/Off; Volume - Blaupunkt 700 DAB Serie Bedienungsanleitung

Scope of delivery | Startup

Scope of delivery

The scope of delivery includes:
• Car sound system
• Remote control
• External Bluetooth microphone
• User Manual
• Support frame
• Small parts set
• Installation material
• Connecting cable
• GPS Antenna

Placing the device in operation

Caution!
Transport securing screws
Ensure that the transport securing screws at the top side
of the device are removed before the startup of the de-
vice.

Switching on/off

Switching on/off with the rotary/pushbutton
For switch-on, press the rotary/pushbutton.
For switch-off, hold the rotary/pushbutton pressed
for more than 2 seconds.
Switching on/off via vehicle ignition
If the car sound system is connected with the vehicle
ignition and it was switched off with the rotary/pushbut-
ton, it is switched on or off with the ignition.

Volume

Adjusting the volume
You can adjust the volume in steps from 0 (off) to 40
(maximum).
Turn the rotary/pushbutton to change the volume.
Muting the car sound system (Mute)
Briefly press the rotary/pushbutton to mute the de-
vice or to reactivate the previous volume.
6

Main menu(Home)

In the main menu, you press the buttons on the touch-
screen to call up the different sources and operating
modes.
Press the button.
- Or -
In the current source, press top left corner of the
screen.
The main menu is displayed.
As long as you do not select a new audio source, the
last active audio source is played back.
Note:
The figures used in these instructions are intended
to facilitate the explanations and details may deviate
from your device.

Setting the reception area

This car sound system is designed for operation in differ-
ent regions with different frequency ranges and station
technologies. The factory default of the reception area is
"Europe (FM/AM)". You can set a different reception area.
In the main menu, press the [
on the bottom bar.
The Settings menu is displayed.
In the left area of the Settings menu, press the
[ General ] button.
The current setting is displayed behind "Radio region".
Tap on the [ Radio region ] button to display the list
of available reception areas.
Select the desired reception area.
The list is hidden, the selected reception area is set.
Press the top left corner of the screen.
The main menu is displayed again.
] (Settings) button
25