Ingeteam INGECON SUN 3Play Handbuch Für Montage Und Betrieb Seite 83

Installing the unit
To access the lower compartment, remove the front screws highlighted in gray in the following figure and open the
cover as shown below.
After making the different connections explained in the sections below, close the unit before starting it. To close
the housing, tighten the aforementioned screws applying a torque of 6 Nm.
Check that the unit is correctly closed before starting up the unit.
ABZ2011IQM01_D - Installation and Operation Manual
Ingeteam
DE
EN
ES
FR
IT
PT
83