Juice Extractor #50 And Basket; Using For The First Time; Using The Machine For The First Time; Assembly And Preparation - Santos 408.050 Benutzungs- Und Wartungsanleitung

JUICE EXTRACTOR #50 and basket

 Robust and very well-constructed (components made of cast aluminum,
engineered plastic and 18/10 stainless steel plate), this juice extractor is
particularly suitable for extracting juice and making coulis and sauce juices from
fruits or vegetables used by the professionals in:
Restaurants, Pizzerias, Snack Bars, Fast Food Outlets, Special Theme
Restaurants, etc.
 It has a powerful motor which drives a centrifugation basket.
 Centrifugation basket: The active, filtering part of the basket is made of stainless
steel, the lower part of the basket providing the drive and the locking system is
made of food-quality engineered plastic.
 18/10 press-drawn stainless steel bowl with stainless steel spout for collecting and
funneling the product juices.

USING FOR THE FIRST TIME:

USING THE MACHINE FOR THE FIRST TIME:

Assembly and preparation:

1. Fit the bowl (4) on the bowl centering device (7) making sure that the juice run-off
spout is located in the indent provided for this at the front of the bowl centering
device, Fig.4
2. Place the basket assembly (5) in the bowl (4), making sure it is located properly
on the drive unit (17). It should go into place automatically by gravity but the
position of the basket in the bowl should be checked when in place. Fig.5
3. Fit the cover (2) on the bowl (4) making sure that when it is fitted the cover outlet
is lined up with the bowl outlet. Fig.6
4. Turn the cover clamping assembly round towards the feed channel with the
clamping handle (1) raised, until it is above the two notches on the side of the
cover (2). Fig.7
5. Turn the clamping handle round (1) downwards to clamp the cover (2) Fig.8
6. Place the fruit plunger (3) in the cover feed channel (2) and check that the
underside of the plunger collar rests against the top of the cover feed channel.
7. Position the pulp container (6) correctly relative to the cover outlet (2), the bowl
(4) and the machine stand (8).
8. Connect the supply cord plug (10) to your mains supply socket.
9. Withdraw the fruit plunger (3) from the cover feed channel (2).
98150 US 4.3 - 12 2010
408050 en ma 2010.12
6/18
www.santos.fr
6/18