Safety / Maintenance; Cover And Bowl Presence Safety Device; Motor Overload Safety Feature; Motor Overheating Safety Feature - Santos 408.050 Benutzungs- Und Wartungsanleitung

SAFETY / MAINTENANCE

COVER AND BOWL PRESENCE SAFETY DEVICE:

For the juice extractor to be able to start, the cover (2) and the bowl (4) must be centered
in position on the bowl centering device (7) and held by the clamping handle (1).
Putting the clamping handle in the vertical position (up) without the bowl or without the
cover means that the machine cannot be started.

MOTOR OVERLOAD SAFETY FEATURE:

Should the motor become blocked (foreign body, object that is too hard, too much
pressure with the fruit plunger on the products being processed), the On / Off switch (11)
automatically trips to the 0 position.
Correct the problem and press the On / Off switch (11) (position 1).
If the problem persists, switch off the power supply to the machine (unplug the cord from
the mains socket (10)) and call in the maintenance service or contact a SANTOS
approved dealer.

MOTOR OVERHEATING SAFETY FEATURE:

If the motor overheats, the On / Off switch (11) automatically trips to the 0 position. Wait
for the motor to cool (15 to 30 minutes), then push the On / Off switch (11) (position 1).
If the problem persists, switch off the power supply to the machine (unplug the cord from
the mains socket (10)) and call in the maintenance service or contact a SANTOS
approved dealer.

TOOL ACCESS SAFETY FEATURE:

The juice extractor can only be started if the cover and bowl are positioned correctly on
the motor unit (7) and the clamping handle is in the closed and locked position.
Releasing the cover (2) clamping handle (1) results in the machine stopping and the
immobilization of the rotating elements in less than 3 seconds.
Re-starting the juice extractor requires specific operation of the On / Off switch (11) again
(position 1).
A cut in the mains power supply results in the On / Off switch (11) stopping (position 0).

MAINTENANCE

Before carrying out any work on the juice extractor, the machine must in all
!
cases be unplugged from the mains power supply and the motor start
capacitor discharged:
98150 US 4.3 - 12 2010
408050 en ma 2010.12
9/18
www.santos.fr
9/18