Skandika Njord Montageanleitung Seite 32

SET UP INSTRUCTIONS
STEP 2
• Fix the seat (I) and the pre-assembled bu ers (N-9) on sliding rail (E) with Allen bolt (N-8) and nut (N-11) as
shown in pic. b.
• Attach the rear stabilizer (H) to sliding rail (E) by using the Allen bolts (N-3), spring washers (N-1) and at
washers (N-2) as shown in pic. a.
• Connect the sliding rail (E) to main frame (D) with Allen bolts (N-3), spring washers (N-1) and at washers
(N-7).
32
D