Programming Software - tell Compact GSM II Schnell-Installationsanweisung

Compact GSM II Quick guide

PROGRAMMING SOFTWARE:

The latest version of the programming software is available on the
manufacturer's website.
The software requires the device password upon connecting to the device.
Factory default password: 1111
Attention! It is highly recommended that you change the default password
upon the first login.
Connecting via USB
1. Launch the Compact GSM II programming software.
2. Power up the device, and then connect it to the computer using a USB A-B
cable.
3. Enter the device password, and then click on the OK button, or if you want to
sign in and change the password at the same time, choose the Change
password option, enter the actual password, then the new password, confirm
the new password, and click on the OK button.
4. After a successful authentication, the Read and Write buttons become
available in the program under the Settings tab.
5. Read the settings stored in the device by clicking on the Read button.
6. Configure the settings as needed, and then write the changed settings into
the device by clicking on the Write button.
:
5