Mean Well KNX-40E-1280D Bedienungsanleitung Seite 19

ETS ‐text
Alarm Duration Difference
Sending
Alarm Counter Difference
Sending
Alarm Counter
Cyclic Sending
The following chart shows the objects that belong to general setting:
Number Name
25, 28, 31, Alarm 1, 2, 3, 4
34
26, 29, 32, Count 1, 2, 3, 4
35
27, 30, 33, Duration 1, 2, 3, 4
36
Dynamic range
[default value]
0-2,800,000
[0]
0-500
[0]
OFF, 1min, 2min, 3min, 4min, 5min,
10min, 15min, 20min, 25min, 30min,
1hour, 2hours, 3hours, 4hours, 5hours,
6hours, 7hours, 8hours
[OFF]
Length
1bit
2bytes
4bytes
Comment
Telegram is sent when there is a duration difference
between current counting and the previous value sent.
This duration difference can be a range of 0 - 2800000
sec, the device is recording but will not send out any
telegram when the difference is set at "0".
Telegram is sent when there is a count difference
between current counting and the previous value
sent. This count difference can be a range of 0 - 500,
the device is recording but will not send out any telegram
when the difference is set at "0".
Send telegram at intervals you desired
Usage
When the measured value is above/below the threshold
a telegram with value 0 or 1 is sent. When the
measurement values return to the normal range(less/
higher than the hysteresis) a telegram with value 0 or 1
is sent.
The device sends the number counted value of threshold
events for output current, output voltage or device
temperature.
The device sends the total duration time (in second) for
output current, output voltage or device temperature.
16