Faulty - Mean Well KNX-40E-1280D Bedienungsanleitung

The following chart shows the objects that belong to general setting:
Number Name
19 Busload measured
20 Busload alarm

3.5 Faulty

There are Over Count , Overload Duration , Short Circuits Count and Time Load Detached in the Faulty menu. Please refer " " "
to tables below for detailed information.
ETS ‐text
Overload Count Function
Overload Count Difference
Sending
Overload Count Cyclic
Sending
Overload Duration Function
Length
1bytes
1bit
" "
Dynamic range
[default value]
Disable
Enable
1 - 1000
[0]
OFF, 1min, 2min, 3min, 4min, 5min,
10min, 15min, 20min, 25min, 30min,
1hour, 2hours, 3hours, 4hours, 5hours,
6hours, 7hours, 8hours
[OFF]
Disable
Enable
Usage
The device sends the measured Busload value in
% at regular intervals [0-255%]
When the measured value is above the threshold a
telegram with value 0 or 1 is sent. When the measurement
values return to the normal range (less than the hysteresis)
a telegram with value 0 or 1 is sent.
" "
Comment
Enable or disable Overload count function
Telegram is sent when there is a count difference
between current counting and the previous value sent.
This count difference can be a range of 0-1000, 0=OFF.
The counter counts once when load is larger than 1.6A.
Send the latest busload value at intervals you desired
Enable or disable Overload duration function
"
12