Mean Well KNX-40E-1280D Bedienungsanleitung Seite 11

ETS-text
Current Measurement
Current Object Type
Current Difference Sending
Current Cyclic Sending
Current Alarm
Current Threshold
Current Hysteresis
Behaviour On Current Alarm Active
Behaviour On Current Alarm Deactive
The following chart shows the objects that belong to general setting:
Number Name
13 Output current measured
14 Output current alarm
Dynamic range
[default value]
Disable
Enable
4byte[DTP14]
2byte[DPT9]
OFF, 10mA, 15mA, 20mA,
25mA, 30mA, 40mA,
50mA, 60mA, 70mA,
80mA, 90mA, 100mA
[OFF]
OFF, 1min, 2min, 3min,
4min, 5min, 10min, 15min,
20min, 25min, 30min,
1hour, 2hours, 3hours,
4hours, 5hours, 6hours,
7hours, 8hours
[OFF]
Disable
Enable
10-1600mA
[1280mA]
10-1280mA
[10mA]
Nothing to do
Send 0
Send 1
Nothing to do
Send 0
Send 1
Length Usage
2bytes The device sends the measured output voltage
value in A or mA in regular intervals.
4bytes
1 bit When the measured value is above the threshold
a telegram with value 0 or 1 is sent. When the
measurement values return to the normal range
(less than the hysteresis) a telegram with value
0 or 1 is sent.
Comment
Enable or disable current measurement
Select data point type
Difference between actual and last sent value
which triggers the sending
Send the latest current value at intervals you
desired
Enable or disable the alarm function
Select a threshold value to perform the Behaviour
on Current alarm Active"
Select a hysteresis value to perform the Behaviour
on Current alarm Deactive"
Select a reaction when current is higher than
Current Threshold
Select a reaction when current is lower than
of "Current Threshold" -" Current Hysteresis", e.g.
1280mA - 10mA = 1270mA
"
"
a value
8