Maximum Tracking - Mean Well KNX-40E-1280D Bedienungsanleitung

The following chart shows the objects that belong to general setting:
Number Name
15 Device temperature
measured
16 Device temperature alarm

3.3 Maximum Tracking

Maximum tacking is available for the measurement sources Output Current and Maximum Device Temperature and is used to
find the maximum observed value over a certain period of time. At the end of each period, a measured value can be sent over the
bus.
ETS ‐text
Maximum Tracking Period
Maximum Current Tacking
Maximum Current Objet Type
Maximum Current Send
Maximum Temperature
Maximum Temperature
Send
Length
2bytes
1 bit
Dynamic range
[default value]
10 - 36,000S
[1800s]
Disable
Enable
2byte[DTP7,integer]
4byte[DTP14]
2byte[DPT9,float]
Do not send
Send at the end of period
Disable
Enable
Do not send
Send at the end of period
Usage
The device sends the measured output voltage
value in °C regular intervals.
When the measured value is above the threshold
a telegram with value 0 or 1 is sent. When the
measurement values return to the normal range
(less than the hysteresis) a telegram with value
0 or 1 is sent.
" " "
Comment
Determine the time period for tracking
Enable or disable maximum current tracking
Select data point type
A telegram containing the maximum measured output
current value is sent after an expired tracking period,
when Send at the end of period is selected
Enable or disable Maximum temperature tracking
A telegram containing the maximum measured
temperature value of the device is sent after an
expired tracking period, when Send at the end of
period is selected
"
10