Technical Data; Noise/Vibration Information; Rechargeable Battery; Charging The Battery - Bosch PST 18 LI Originalbetriebsanleitung

16 | English
(11) Orbital action adjusting lever
(12) Hood for extraction attachment
(13) Guide roller
(14) Base for Cut Control
(15) Saw blade
(16) Viewing window for Cut Control
(17) Shock protection guard
(18) Saw blade receptacle
(19) Worklight
(20) Handle (insulated gripping surface)
(21) Anti-splinter guard
(22) Guide for parallel guide
(23) Scale for mitre/bevel angles
(24) Base plate screw
(25) 0° cut mark
(26) 45° cut mark
(27) Locking screw for parallel guide
(28) Parallel guide with circle cutter
a)
(29) Circle cutter centring tip
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical data

Jigsaw
Article number
Stroke rate control
Pendulum action
Rated voltage
No-load stroke rate n₀
Stroke
Max. cutting depth
– in wood
– in aluminium
– in steel (unalloyed)
Max. cutting angle (left/right)
Weight according to EPTA-Pro-
A)
cedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperature
B)
during operation and during
storage
Recommended rechargeable
C)
batteries
1 609 92A 6DA | (11.05.2021)
Jigsaw
Recommended battery chargers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
C) The following chargers are not compatible with the PBA re-

Noise/Vibration Information

Noise emission values determined according to
EN 62841‑2‑11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 83 dB(A); sound power level
94 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841‑2‑11:
Cutting boards with saw blade T 144 D:
a
h,B
cutting sheet metal with saw blade T 118 A:
a)
a
h,M
a)
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
PST 18 LI
plication tools or is poorly maintained, the vibration level
3 603 K11 0..
and noise emission value may differ. This may significantly
●
increase the vibration and noise emissions over the total
working period.
●
To estimate vibration and noise emissions accurately, the
V= 18
times when the tool is switched off or when it is running but
−1
min 0−2400
not actually being used should also be taken into account.
mm 20
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
mm 80
ator from the effects of vibration, such as servicing the
mm 12
power tool and application tools, keeping their hands warm,
mm 5
and organising workflows correctly.
° 45

Rechargeable battery

kg 2.0 (1.5 Ah)–
2.3 (6.0 Ah)

Charging the battery

°C 0 to +35
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
°C –20 to +50
your power tool.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
PBA 18V...W-.
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
(triax vector sum) and uncertainty K
h
2 2
= 11 m/s , K = 1.5 m/s ,
2 2
= 10 m/s , K = 1.5 m/s .
PST 18 LI
AL 18...
Bosch Power Tools