Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GDS 12V-115 Professional Originalbetriebsanleitung

14 | English
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Technical Data

Cordless Impact Wrench
Article number
Rated voltage
A)
No-load speed
– Setting 1
– Setting 2
A)
Impact rate
– Setting 1
– Setting 2
A)
Max. torque
Machine screw diameter
Max. screw diameter
Tool holder
Weight according to
B)
EPTA-Procedure 01:2014
Recommended ambient temperature during
charging
1 609 92A 6PS | (14.09.2021)

Intended Use

The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Tool holder
(2) Locking sleeve
(3) "PowerLight" lamp
(4) Button for "PowerLight" lamp
(5) Speed indicator
(6) Button for electronic speed preselection
(7) Battery release button
(8) Battery
(9) Rotational direction switch
(10) On/off switch
(11) Battery charge indicator
(12) Handle (insulated gripping surface)
a)
(13) Double bit
(14) Universal bit holder
(15) Screwdriver bit
(16) Application tool (e.g. impact socket)
a)
(17) Belt clip
a)
(18) Coloured clip
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GDR 12V-110
3 601 JE0 0..
V=
-1
min 0–1200
-1
min 0–2600
-1
min 0–2700
-1
min 0–3100
Nm
mm M4–M12
mm
¼" internal hexagon
kg 0.92–1.2
°C 0 to +35
a)
a)
a)
GDS 12V-115
3 601 JE0 1..
12
0–1200
0–2600
0–2700
0–3100
110
M4–M12
8
∎ 3/8"
0.91–1.2
0 to +35
Bosch Power Tools
12
115
8