Klarstein 10029241 Bedienungsanleitung Seite 50

EN
50
What?
Spillovers on the touch
controls.
Boilovers, melts, and hot
sugary spills on the glass
How?
1 Switch the power to
the cooktop off.
2 Soak up the spill
3 Wipe the touch
control area with a
clean damp sponge
or cloth.
4 Wipe the area
completely dry with a
paper towel.
5 Switch the power to
the cooktop back on.
Remove these
immediately with a
fish slice, palette knife
or razor blade scraper
suitable for ceramic
glass cooktops, but
beware of hot cooking
zone surfaces:
1 Switch the power to
the cooktop off at the
wall.
2 Hold the blade or
utensil at a 30° angle
and scrape the soiling
or spill to a cool area
of the cooktop.
3 Clean the soiling or
spill up with a dish
cloth or paper towel.
4 Follow steps 2 to 4 for
"Everyday soiling on
glass" above.
Important!
The cooktop may beep
and turn itself off, and
the touch controls may
not function while there
is liquid on them. Make
sure you wipe the touch
control area dry before
turning the cooktop
back on.
• Remove stains left
by melts and sugary
food or spillovers as
soon as possible. If
left to cool on the
glass, they may be
difficult to remove
or even permanently
damage the glass
surface.
• Cut hazard: when
the safety cover is
retracted, the blade
in a scraper is razor-
sharp. Use with
extreme care and
always store safely
and out of reach of
children.