Step 2: Safety And Conformance Information - PICO PicoScope 6000E Serie Benutzerhandbuch

User's Guide

Step 2: Safety and conformance information

To prevent possible electrical shock, fire, personal injury, or damage to the product, carefully read this safety
information before attempting to install or use the product. In addition, follow all generally accepted safety practices
and procedures for working with and near electricity.
The product has been designed and tested in accordance with the European standard publication
EN 61010-1: 2010+A1:2019 (Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory
Use) and EN 61010-2-030: 2010 (Requirements for Testing and Measuring Circuits). The product left the factory in a
safe condition.
The following safety descriptions are found throughout this guide:
A WARNING identifies conditions or practices that could result in injury or death.
A CAUTION identifies conditions or practices that could result in damage to the product or equipment to which it is
connected.
2.1 Symbols
These safety and electrical symbols may appear on the product or in this guide.
Symbols
Direct current
Alternating current
Earth (ground) terminal
Chassis terminal
Equipment protected throughout by double insulation or reinforced insulation
Possibility of electric shock
Caution
CAT
EN 61010 overvoltage category
Do not dispose of this product as unsorted municipal waste
The terminal can be used to make a measurement ground connection. The terminal is NOT a safety or protective
[3]
earth.
Appearance on the product indicates a need to read the supplied safety and operation instructions.
[4]
This oscilloscope is intended for the measurement of electrical signals up to the limits specified in this guide and in
the PicoScope 6000E Series Data Sheet. For safe limits of accessories, please refer to the documentation supplied by
the manufacturer.
To prevent injury or death use the product only as instructed. Protection provided by the product may be impaired if
used in a manner not specified by the manufacturer.
DO338-5
[3]
[4]
Copyright © 2020–2021 Pico Technology Ltd. All rights reserved.
Description
WARNING
PicoScope 6000E Series oscilloscopes
3