Step 1: Install The Picoscope Software; System Requirements - PICO PicoScope 6000E Serie Benutzerhandbuch

PicoScope 6000E Series oscilloscopes
Kit contents
Your PicoScope 6000E Series oscilloscope is supplied with the items shown below. If any are missing, please
contact your supplier.
PicoScope 6000E Series oscilloscope
PicoScope 6000E Series User's Guide
(this document)
PS016 12 V, 7 A power adaptor with 1 to 4x IEC
leads (region-dependent)
USB 3.0 cable, 1.8 m
Carry case
P2056 500 MHz 10:1 passive probe with readout
pin (with 500 MHz to 1 GHz oscilloscopes)
P2036 300 MHz 10:1 passive probe with readout
pin (with the 300 MHz PicoScope 6403)

Step 1: Install the PicoScope software

1.1 System requirements

To ensure that the software operates correctly, you must use a computer with the system requirements shown in
the table below. The performance of the oscilloscope will improve with a more powerful PC, and will benefit from a
multi-core processor.
Operating system
Processor
Memory
Free disk space
Ports
PicoScope 6 for Linux and PicoScope 6 for macOS are beta software.
[2]
1.2 Installing the software
1. Go to picotech.com/downloads, select PicoScope 6000 Series from the list on the left, then select your model
and the latest PicoScope software from the lists that appear. Download and run the installer.
2. In the PicoScope installer, select the language you wish to use.
3. Follow the on-screen instructions to install the software. Do not connect the oscilloscope device until the
installation is complete.
4. You can try out the software with a demo device now, by clicking the new PicoScope icon on your desktop.
For more information on the software, please refer to the A to Z of PC Oscilloscopes at
software User's Guide, which you can download from
the software
2
Item
Copyright © 2020–2021 Pico Technology Ltd. All rights reserved.
Quantity
1
1
1
1
1
4 (2x dual pack) or as ordered
4 (2x dual pack) or as ordered
Specifications
Microsoft Windows 8 or 10, 32-bit and 64-bit versions
Linux: Ubuntu or openSUSE, 64-bit only
macOS, 64-bit only
As required by the operating system
USB 3.0 recommended
USB 2.0 compatible
picotech.com/downloads
Order code for replacements
N/A
Free download
PQ247
TA155
PA208
TA437 (single pack)
TA480 (dual pack)
TA436 (single pack)
TA479 (dual pack)
[2]
[2]
picotech.com/library
or access from the Help menu within
User's Guide
or the
DO338-5