Safety Information; Symbols Description; English - PICO PicoScope 2000 Series Kurzanleitung

Quick Start Guide
1

English

1.1 Introduction
Thank you for purchasing a Pico Technology PC Oscilloscope. This guide explains how
to install the PicoScope software, connect your oscilloscope, and access the full User's
Guide from the disc supplied.
Once you have finished the basic installation, the User's Guide and Data Sheet will
provide further information about setting up and using your oscilloscope.
1.2

Safety information

To prevent possible electrical shock, fire, personal injury, or damage to the product,
carefully read this safety information before attempting to install or use the product.
In addition, follow all generally accepted safety practices and procedures for working
with and near electricity.
The product has been designed and tested in accordance with the European standard
publication EN 61010-1:2010, and left the factory in a safe condition. The following
safety descriptions are found throughout this guide:
A WARNING identifies conditions or practices that could result in injury or death.
A CAUTION identifies conditions or practices that could result in damage to the
product or equipment to which it is connected.
Symbols
These safety and electrical symbols may appear on the product or in this guide.
Symbols
DO231-2
Description
Direct current.
Alternating current.
Equipment protected throughout by double insulation or
reinforced insulation.
Possibility of electric shock.
Caution.
Static awareness. Static discharge can damage parts.
EN61010 measurement category.
Do not dispose of this product as unsorted municipal waste.
Copyright © 2006-2015 Pico Technology Ltd. All rights reserved.
PicoScope 2000 Series Oscilloscope
7