English; Introduction - PICO PicoScope 6000E Serie Benutzerhandbuch

User's Guide

English

Introduction

Thank you for purchasing a PicoScope 6000E Series PC oscilloscope. This guide explains how to install the
PicoScope software and connect the oscilloscope to your computer. It also contains important safety information
and advice on accessing user manuals and technical support. Please retain it for future reference.
For full technical data relating to the oscilloscope, see the PicoScope 6000E Series Data Sheet, available from
picotech.com/downloads.
This guide covers the following models. Documentation for other Pico products is available from
picotech.com/downloads.
PicoScope 6426E
PicoScope 6425E
PicoScope 6824E
PicoScope 6424E
PicoScope 6406E
PicoScope 6405E
PicoScope 6804E
PicoScope 6404E
PicoScope 6403E
For more information on maximum capture duration and permitted channel combinations, refer to the PicoScope
[1]
6000E Series Data Sheet.
We recommend that you use this document in the order it is presented:
Step 1: Install the PicoScope software
Step 2: Read the oscilloscope safety and conformance information
Step 3: Connect the oscilloscope
DO338-5
Analog
Resolution
channels
4 8, 10 or 12 bits, FlexRes
4 8, 10 or 12 bits, FlexRes
8 8, 10 or 12 bits, FlexRes
4 8, 10 or 12 bits, FlexRes
4 8 bits, fixed
4 8 bits, fixed
8 8 bits, fixed
4 8 bits, fixed
4 8 bits, fixed
Copyright © 2020–2021 Pico Technology Ltd. All rights reserved.
PicoScope 6000E Series oscilloscopes
Bandwidth
1 GHz
®
750 MHz
500 MHz
500 MHz
1 GHz
750 MHz
500 MHz
500 MHz
300 MHz
Capture memory (shared
between active channels)
4 GS
(2 GS at 10-/12-bit)
[1]
4 GS
(2 GS at 10-/12-bit)
[1]
4 GS
(2 GS at 10-/12-bit)
[1]
4 GS
(2 GS at 10-/12-bit)
[1]
2 GS
2 GS
2 GS
2 GS
1 GS
1