Safety Requirements; Unit Identification - Sabiana Carisma Whisper CFF-ECM Anweisungen Für Installation, Gebrauch Und Wartung

EN
This manual is to be considered a part of the machine
and must be preserved for future reference until
the machine is finally dismantled.
The manual is divided into the following sections.
– General information where important informa-
tion related to each phase of the life of the unit is
described (section dedicated to all recipients)
– Installation where all the steps to be followed by
the installer are described (installer section)
– Commissioning where all the phases for starting
the machine are described (installer section)
– Use where the operations that the user of the unit
can perform are described (user section)
– Maintenance where all the operations that must
be carried out for correct maintenance are descri-
bed (section dedicated to the maintenance tech-
nician)
– Recycling and disposal where all the operations
to be carried out at the end of the unit life are de-
scribed (section dedicated to the owner, installer
and maintenance technician)
The instruction manual must always stored in a pro-
tected and dry place.
The user can request a new manual from the manu-
facturer or from the local retailer if the manual is lost
or damaged. The request must include details of the
machine model and the serial number indicated on
the identifying data plate.
This manual reflects the technical features at the
date of preparation; the manufacturer reserves the
right to upgrade the production and the subsequent
manuals without being under an obligation to also
update previous versions.
The manufacturer will not be held liable in case of:
– improper or incorrect use of the unit;
– use that does not comply with the information
expressly specified in this publication;
– serious shortcomings in the foreseen and recom-
mended maintenance operations;
– changes made to the machine or any unauthori-
sed operation;
– using non-genuine spare parts or parts not speci-
fic to the model;
– total or partial failure to comply with the in-
structions;
– exceptional events.
24

Safety requirements

In the design and construction phases of the ma-
chine have been adopted special measures to avoid
risks for the operators in the typical situations of use
during the technical life of the appliance and espe-
cially in the following events:
• installation
• use
• maintenance of the unit.
Interventions on the unit
Before any intervention on the unit please take the
following precautions:
• disconnect the electrical power supply.
• please use suitable protective clothing.
• don't approach the unit with cravats, scarfs or flut-
tering clothes, which could get trapped in the fan
section.
• assign the installation to qualified technical staff.
• please keep the working area clean.
Please make sure that the earthing has been correct-
ly performed.
In an easily accesible position near the unit or the
unit has to be installed a security switch, which inter-
rupts the power supply.
If the unit needs maintenance, please switch it off
and wait some minutes. during maintenance please
always wear protection gloves.
Fan blades may reach speeds of up to 1000 rpm; nev-
er introduce objects or the hand into the fans.
Do not remove the electrical board
printed circuit guard from the control unit
mounting.
If the filter requires replacing or cleaning, al-
ways make sure it is repositioned correctly be-
fore starting the unit.

Unit identification

Each unit is provided with an identification label,
which informs you on the construction data and the
model type.
The label is located inside the unit on the electric
controls side.