Installation; Installation/Removal Of Barn Doors And Filter Frame - Cameo F2 T Bedienungsanleitung

INSTALLATION

Thanks to its four plastic feet, the spotlight can be positioned in a suitable location on a level surface. Mounting to a traverse is possible
with the pre-installed mounting bracket (A) and a suitable traverse clamp (optional). Ensure firm connections and secure the spotlight by
attaching a suitable safety cable to the securing lug on top of the housing and intended for this purpose (B). Use the side-mounted lever
screws (C) to adjust the vertical beam angle.
Important: Overhead mounting requires extensive experience, including the calculation of the load limit values of the installation material
and regular safety inspection of all installation materials and spotlights. If you do not have these qualifications, do not attempt to perform an
installation yourself. Refer instead to a qualified professional.
A
B
C

INSTALLATION/REMOVAL OF BARN DOORS AND FILTER FRAME

To install or remove the barn doors and the filter frame please push the spring-loaded locking pin (E) of the bracket so that it folds upwards.
Then return the bracket to its original position so that the locking pin re-engages.
E
10