Maintenance And Inspection By The Distributor / Maintenance Schedule; Maintenance Schedule - Annual Inspection - Thomashilfen Octopus Gebrauchsanweisung

Disinfection
Clean the padding, plastic parts, and metal parts before disinfecting.
Damp wipe all the plastic and metal parts on the product with disinfectant. Only
water-based products should be used. When disinfecting note the directions from the
manufacturer in question.
The padding has to be disinfected before reusing. To do so use the right detergent in
keeping with the guidelines of the Association of Applied Hygiene VAH (Verbund für
Angewandte Hygiene e.V.).
Maintenance and inspection by the distributor
Preparation
A copy of the Instructions for Use has to be enclosed with the product. If one is
not available, request a copy from the distributor. Familiarise yourself with how the
product works. If you are not familiar with the product, read the Instructions for Use
before testing it. Clean the product before starting to test is. Please note the care in-
structions in the Instructions for Use and product-specific test instructions. If you have
further questions, please contact the staff member you dealt with or Thomashilfen
directly.
Service and repairs to the product should only be done by qualified staff. It is the
user's responsibility to ensure that the prescribed inspections / maintenance are done
regularly and in a timely fashion. If damage is apparent, the user has to actively in-
form and have the damage fixed immediately by qualified staff.
Maintenance Schedule – Annual Inspection
Area
1
Adjustment options
2
Padding
3
Belts
4
Plastic parts
5
Metal parts
Emergency hammer with belt
6
cutter
7 Labels
done by:
2021-04
Instructions for Use – Octopus
Function
/
/
/
/
/
/
= Inspection |
Damage
/
/
/
/
/
/
/
on:
= Reuse |
= Test completed
Replace
21