Setting A Delay Timer For The Second Sa 1-3V, Sa 0-3V Or Sai Flash (Bathroom Switch); Setting The Delay Timer For The Filter Alert - Zehnder ComfoAir Basic Benutzerhandbuch

2.8 Setting a delay timer for the second SA
1-3V, SA 0-3V or SAI Flash (bathroom
switch)
A high ventilation setting is not always desired, for
instance when you only go to the bathroom for a
short time. Therefore a delay time, in which the unit
will do nothing with the information it receives from
the bathroom switch, can be set. How to switch the
overrun timer on or off can be found in the document
of the SA 1-3V, SA 0-3V or SAI Flash. The delay timer
can be set in P-menu 21 between 0 minute and 15
minutes.
Action on Reaction on
display display***
1
Press
2
Press
3
Press
4
Press
Or press
5
Press
Press
6
Press
7
Press
*** The displayed settings are the standard setting of the unit. This may differ from the actual setting of the unit.
Explanation
The main P-menus
are being entered.
The sub P-menus of
the selected P-menu
are being entered
The selected
P-menu is being
entered.
Time delay is
increased by 1
minute.
Time delay is
decreased by 1
minute.
Time delay is
confirmed and
returned to the sub
P-menus of the
selected P-menu.
Old settings are
restored and
returned to the sub
P-menus of the
selected P-menu.
Returned to the
main P-menus.
Returned to the
default screen.

2.9 Setting the delay timer for the filter alert

How fast the filters of the unit needs cleaning
or replacing depends on the air quality of the
environment.
In the countryside the filters may not pollute as
fast as in urban places. Therefore the filter alert
has an adjustable delay timer. After the delay timer
has run out the following filter malfunctions appear
alternately on the display:
How to clean or replace the filters is mentioned in
the "Maintenance" chapter. The delay timer can be
set in P-menu 24 between 10 weeks and 25 weeks.
Action on Reaction on
display display***
1
Press
2
Press
3
Press until
P24 appears
4
Press
5
Press
Or press
6
Press
Press
7
Press
8
Press
and .
Explanation
The main P-menus
are being entered.
The sub P-menus of
the selected P-menu
are being entered
The different sub
P-menus of the
selected P-menu are
being displayed.
The selected
P-menu is being
entered.
Time delay is
increased by 1
minute.
Time delay is
decreased by 1
minute.
Time delay is
confirmed and
returned to the sub
P-menus of the
selected P-menu.
Old settings are
restored and
returned to the sub
P-menus of the
selected P-menu.
Returned to the
main P-menus.
Returned to the
default screen.
11 - EN