Technical Data - Leuze ODSL 30 Serie Bedienungsanleitung

Decommissioning, maintenance
CAUTION
Ä
Do not open the device yourself under any circumstances! There
is otherwise a risk of uncontrolled emission of laser radiation from
the device.
There are no user-serviceable parts inside the device.
If faults cannot be cleared, the device should be switched off and
protected against accidental use.
Ä
Package the device for transport and storage in such a way that is
protected against shock and humidity. Optimum protection is
achieved when using the original packaging.
Ä
Ensure compliance with the approved environmental conditions
listed in the specifications.
Ä
Do not use aggressive cleaning agents such as thinner or acetone
for cleaning the device.

Technical data

NOTICE
Technical data
Ä
Additional technical data and notices on using the device can be
found in the operating instructions.
CAUTION
UL applications
For UL applications: use is permitted exclusively in Class 2 circuits ac-
cording to NEC.
General specifications
Optical data
Measurement range
– All devices
– ODSL 30/D...
Resolution (on the LC display)
Light source
Wavelength
Max. output power (peak)
Impulse duration
– 200 ... 30,000 mm
(6 ... 90 % diffuse reflection)
– 200 ... 65,000 mm
(50 ... 90 % diffuse reflection)
0.1 mm / 1 mm (factory setting)
laser, pulsed
655 nm (visible red light)
4.5 mW
267 ns
EN
23