Manual Operation; Timer Operation; Continous Operation - EuroLite N-250 Bedienungsanleitung

For immediate fog output at the maximum volume of fog, keep the MANUAL button pressed. The display indicates
"Manual Output". As soon as you release the button, the fog output will stop. The manual operation will take
priority over the continuous operation and the timer operation. Even if one of these operating modes is activated,
the fog machine will always emit the maximum volume of fog when the MANUAL button is pressed.
Timer mode makes it possible to manually configure the fog output volume between 1% and 100%, as well as the
output duration and the interval at which the output is to begin. Use the FUNCTION button to select the "Timer
Out", "Duration Set", and "Interval Set" menu items, and set the desired value using UP and DOWN respectively.
FUNCTION Interval Set
To activate Timer Mode, press the TIMER button. The unit counts down to 0 seconds and emits fog. To deactivate
the timer mode, press the TIMER button again.
To operate the machine with continuous output, configure the output volume between 1% and 100%. Then the
machine emits fog continuously until a re-heat is needed. Select the "Volume Out" menu option with the
FUNCTION button and set the desired value using UP and DOWN.
FUNCTION Volume Out
Press the VOLUME button, to activate continuous fog output. The display indicates "Volume" followed by the
value that was set in menu item "Volume Out". To stop the fog output, press the VOLUME button once again.

MANUAL OPERATION

TIMER OPERATION

/ Duration Set
▼ / ▲
1-200S

CONTINOUS OPERATION

▼ / ▲
1-100%
/
▼ / ▲
1-200S
22 • EN
Timer Out
▼ / ▲
1-100%