Dometic CFF20 Bedienungsanleitung Seite 18

Operation
Reversing the lid opening
➤ CFF70DZ: To reverse the lid opening, proceed as shown (fig. 6, page 7).
Opening or removing the lid (fig. 7, page 8)
➤ To open the lid, unlatch (A).
CFF35, CFF45: The lid can be opened from either side.
➤ CFF35, CFF45: To remove the lid, unlatch both sides at the same time (B).
CFF20, CFF70DZ: To remove the lid, push the lid beyond the lid stop
position (B).
Lid stop position (fig. 8, page 9)
The lid has a built-in stop position (A). Do not force the lid past the built-in stop (B).
A
NOTICE! DAMAGE HAZARD
CFF35, CFF45: If the lid has been forced too far, follow the steps
described in the chapter "The lid has been forced past the built-in stop
(CFF35, CFF45 only)" on page 28.
Removing the basket (fig. 9, page 9)
A
NOTICE! DAMAGE HAZARD!
Removing the basket with the lid open may scratch the lid and deform
the basket. We recommend to remove the lid before removing the
basket.
Selecting the temperature units
Temperature display units can be switched between Celsius and Fahrenheit as
follows:
➤ Switch on the cooler.
➤ CFF20, CFF35, CFF45: Press the "SET" button (fig. 3 5, page 5) twice.
CFF70DZ: Press the "SET" button (fig. 3 5, page 5) three times.
➤ Use the "UP +" (fig. 3 7, page 5) or "DOWN –" (fig. 3 6, page 5) buttons to
select Celsius or Fahrenheit.
✔ The selected temperature unit then appears in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
18
CFF20, CFF35, CFF45, CFF70DZ
EN