Lighting Instructions - Napoleon PRO 500 Handbuch

8

Lighting Instructions

EN
!
WARNING!
WARNING!
supply valve.
2. Push and turn any main burner knob
slowly to the high position. If the pilot
lights, continue to push down on the
control knob until the burner lights and
3. If the pilot does not ignite, then
immediately turn the control knob back
4. If the pilot and burner will not ignite
within 5 seconds, turn the control knob
to the 'off' position and wait 5 minutes
for any excess gas to dissipate. Either
repeat steps 2 and 3 or light with a
5. If lighting the unit with a match, clip
the match into the supplied lighting
rod. Hold the lit match down through
the grill and sear plate while turning the
corresponding burner valve to high.
!
NOTE!
www.napoleon.com
Side
Burner
Left
Igniter
Burner
Open lid
Ensure all burner controls are in the off position. Slowly turn on the gas
Main Burner
Lighting
1. Open grill lid
then release.
to the 'off position and repeat
step 2 several times.
match.
Do not use rear burner while operating main burner.
Left Centre Right Centre Rear
Burner Burner Burner
Rear Burner Lighting
(if equipped)
1. Open grill lid
2. Remove warming rack.
3. Turn rear burner control to high
position.
4. Press and hold
igniter button until burner lights,
or light by match.
5. If ignition is not immediate, turn
burner control off. Wait 5 minutes.
Repeat.
Lights
Right
Burner
Off Position
Side Burner Lighting
(optional)
1. Open burner cover.
2. Turn side burner control to high
position.
3. Press and hold
igniter button until burner lights, or
light by match.
4. If ignition is not
immediate, turn burner control off.
Wait 5 minutes. Repeat.
N415-0539CE-GB-DE Jul 14.20