Herunterladen Inhalt Inhalt Diese Seite drucken

Napoleon PRO 500 Handbuch Seite 89

Vorschau ausblenden Andere Handbücher für PRO 500:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

16
3. Impaired ventilation of hot air from the grill - For the burners to function properly, hot air must have a way
to escape the grill. If the hot air is not allowed to escape, the burners can become deprived of oxygen causing
them to back-flash. If this occurs repeatedly, the ceramic could crack. Never cover more than 75% of the
EN
cooking surface with solid metal (i.e., griddle or large pan).
4. Incorrect cleaning - Do not clean the ceramic tile with a wire brush. If debris is collecting on your burner,
light the burner and operate on high for 5 minutes with the lid open, allowing debris to burn off.
!
CAUTION!
do not use the gas grill. Have the part replaced by your Napoleon Grill dealer or qualified gas installer.
Aluminum Castings: Clean castings periodically with warm soapy water. Aluminum will not rust, but high
temperatures and weathering can cause oxidation to occur on aluminum surfaces. This appears as white spots
on the castings. To refinish these areas, clean first and sand lightly with fine sandpaper. Wipe the surface to
remove any residue and paint with high temperature barbecue paint. Protect surrounding areas from over-
spray. Follow the manufacture's directions for curing.
!
WARNING!
your grill.
Lights: To replace the halogen bulb in your grill you must first remove the lens from the light housing. To
remove the lens from the housing, remove the Philips screw securing the housing in place. Snap the lens out
of the housing (including the metal bracket). Do not touch the halogen bulb with your bare hands. The oil from
your fingertips will reduce the life of the bulb. With gloved hands gently pull the old bulb from the socket and
replace with the new bulb. Reinstall the lens, by snapping it back into the housing and bend the tabs on the
front of the housing back in to position.
1
www.napoleon.com
Check for abrasions, melting, cuts, and cracks in the hose. If any of these conditions exist,
Always wear protective gloves when changing the halogen bulb in the internal lights of
3
Replacement Screen S81006
2
N415-0539CE-GB-DE Jul 14.20

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis