Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Devices - Kärcher K 4.98 M Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für K 4.98 M:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
10 - 30 m: 2,5 mm
Check the high-pressure hose for damage
before every use. Please arrange for the im-
mediate exchange of a damaged high-pres-
sure hose.
Do not use the appliance when there are oth-
er persons around unless they are also wear-
ing safety gear.
High-pressure hoses, fixtures and couplings
are important for the safety of the appliance.
Only use high-pressure hoses, fixtures and
couplings recommended by the manufactur-
er.
Cleaning operations which produce oily
waste water, e.g. engine washes, underbody
washes, may only be carried out using wash-
ing stations equipped with an oil separator.
Note
The appliance must not be operated by chil-
dren or persons who have not been instruct-
ed accordingly.
The operator must use the appliance proper-
ly. When working with the appliance, he must
consider the local conditions and pay due
care and attention to other persons, in partic-
ular children, who are nearby.
Observe a distance of at least 30 cm when
using the jet to clean painted surfaces to
avoid damaging paintwork.
Wear protective clothing and safety goggles
to protect against back spray containing wa-
ter or dirt.
Never leave the appliance unattended when
it is in operation.
This appliance was designed to be used with
detergents which are supplied or recom-
mended by the manufacturer. The use of oth-
er detergents or chemicals may compromise
the safety of the appliance.
Make sure that the power cable or extension
cables are not damaged by running over,
pinching, dragging or similar. Protect the
power cable from heat, oil, and sharp edges.
The connection between the power cable
and extension cable must not lie in water.
All current-conducting parts in the working
area must be protected against jet water.
The appliance may only be connected to an
electrical supply which has been installed in
accordance with IEC 60364.
10
English
2
The appliance may only be connected to al-
ternating current. The voltage must corre-
spond with the type plate on the appliance.
The minimum fuse rating required at the
socket outlet is 10 A (slow-blow).
To avoid accidents due to electrical faults we
recommend the use of sockets with a line-
side current-limiting circuit breaker (max.
30 mA nominal tripping current).
The plug and coupling of the extension cable
used must be watertight.
Always fully unroll electrical cables from the
cable drum.

Safety Devices

Safety devices prevent injury and may not be
modified or bypassed.
Unit switch
The switch prevents unintended starting of the
appliance. Stop the appliance during breaks or
after operation.
Safety catch
The safety catch on the trigger gun prevents the
appliance from being switched on unintentional-
ly.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

K 3.97 m

Inhaltsverzeichnis